Description
Clear one phase gel for modeling nails with high instantly aligns properties, medium viscosity. Possesses
good adhesive qualities. It can be used both for modeling and as a substrate for colored and camouflage
gels, as well as overlapping designs and painting, suitable for aquarium design. No detachment and no
yellowing.
Curing time: 2 minutes in UV lamp, 60 seconds in LED lamp.
Instructions for application of universal PNB gels:
1. Degrease the nail surface by the Nail Prep. We move the cuticle, remove the gloss from the nail plate
with a 180/240 grit buff. After that we remove the dust and apply Nail Dehydraror.
2. Apply an acid (Acid Primer) or an acid-free (Bond Control), depending on the condition of the nail
plate. We use an acid primer when the nail plate is very wet, an acid-free primer is suitable for normal.
Acid Primer must be applied with a half dry brush in a small amount without contacting the skin. It is
evaporating from the nail plate.
3. As a base we can use UV/LED Builder Gel Crystal Clear/Crystal Pink for choice. It is applied in a thin
layer with rubbing movements. We cure in LED lamp 30-60 sec.
4. Set the template alternately on each finger and lay out a thin substrate of desired length and shape,
model the architecture of nails with gel of selected shade. To create an arch, you can press the gel for 7-
12 seconds, depending on the lamp. Then we send the gel to the lamp for 60 seconds.
5. Remove the residual stickiness with Gel Cleanser.
6. We use a 180/240 grit file for creating the necessary shape and length.
7. Apply a UV/LED Top Coat for giving shine and protection against chips and scratches, curing in a
UV/LED lamp 60 sec.
*If the nail plate is thinned, wet – Bio Base can be used as a base coat. It should be applied in a very thin
layer, rubbing it onto the previously prepared nail, curing in the lamp for 30 seconds.
Texture: medium viscosity
